Qi Wireless Charger Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holding bracket designed to support a phone upright, or a small tablet sideways. It holds the generic…
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 48
- Wydruki
- 2
- Wyświetlenia
- 354
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is a holding bracket designed to support a phone upright, or a small tablet sideways. It holds the generic circular Wireless Qi Chargers with space for connecting and routing a USB cable.
V9 has further cuts to reduce material use, although done in a way to improve prints through less bridging. Print time is now almost half that of previous versions.
The Qi Charger is centred at 65mm above the stands - so for optimum results the phone will be around twice that length if the internal charging unit sits half way up your phone. Mine is a Samsung S7 and it works perfectly.
The dimensions of the charger that it holds are as follow:
Outer Diameter: 70mm
Depth: 9.8mm
All the USB charging cables that I've tried have fitted with minimal persuasion - but I wanted it tight to ensure that it was held securely.
Print Settings
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2 mm
Infill:
25%
Category: Gadgets