Arcade Joystick Tops Release One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here are some of the replacement arcade joystick tops that I have designed to work with your standard…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Update 21/02/26: Apologies this one slipped through the net. This should of been an STL version waaay before now.
in anycase there is now all 12 of the joysticktop variations that were previously locked behind my Patreon.
...
Here are some of the replacement arcade joystick tops (and discs) that I have designed to work with your standard Sanwa type joystick, that have a screw thread.
They are push on to fit and don't require screwing.
I have tested them with a variety of different Sanwa clones and the fit varies but only a little, a first time fitting can be a little fiddly but they also don't come off easy so I see that as a good thing. Mind you don't trap your fingers between the top and your control board when the blighter suddenly drops on.
PATREON & PATREON SHOP.
https://www.patreon.com/3DFreeman
Thanks for checking out my designs.