Big Block V8 Blower (Ender 3 V2 + Dragonfly + Orbiter v2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my first blower design for the Ender 3V2. This design is using the Dragonfly BMS hot end, orbiter V2 extruder.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 1738
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my first blower design for the Ender 3V2. This design is using the Dragonfly BMS hot end, orbiter V2 extruder, and 2x 4010 or 4020 fans on the sides and one 3010 fan on the front. There are now many variations of this, so please check out the pictures to download the files that match the pieces for your configuration.
This is a big printer head, so you will have to do some modification to your X-stop to avoid collision. Mounting head prints easiest with greater than 72° overhang angles to avoid tons of support structure. Don't forget to use the proper voltages for your fans and perform E step tuning and flow rate tuning if your changing to new components!
5/15/22 Update
Added alternate parts for 4010 front cooling fan. 4010 fan model has slightly better overhang performance and is easier to assemble.
5/21/22 Update
Added models for Orbiter V1.5 and for stock hot ends
Check out the development video on Youtube for more information.
https://youtu.be/2R2jAomnifE