First Layer Calibration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Video link: https://rumble.com/vb9fxr-3d-printer-first-layer-calibration-process.html
- Ocena
- 4,99 / 5
- Polubienia
- 1795
- Pobrania
- 24 294
- Wydruki
- 134
- Wyświetlenia
- 89 219
- Oceny
- 210
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Video link:
https://rumble.com/vb9fxr-3d-printer-first-layer-calibration-process.html
This is a 3 x 3 inch square used to help calibrate that oh so important first layer. This seems to be one of the most problematic asked about questions with new people to the 3d printer community. I decided to make a simple test part and video to show the process. Hope this helps!
(( There's a already sliced file for a Prusa Mini/Mini+ ))
((( Some have mentioned they need to run the calibration again when switching to a different material )))
Print instructions
If you can't use my gcode try to slice so it starts printing from the front and works backwards.
I would change the "fill angle" to 0(zero).
0.200mm layer height
PLA