Ender 3 (2020 Extrusion) zip tie clips (Imported from Thingiverse)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modeled these to fit the 2020 extrusion used by the Creality Ender 3 Pro. There are 2 orientations. The default…
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 151
- Wydruki
- 2
- Wyświetlenia
- 656
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I modeled these to fit the 2020 extrusion used by the Creality Ender 3 Pro.
There are 2 orientations. The default orientation will run the wire ties in the direction of your extrusion slot. The 90 degree orientation will run the wire ties perpendicular to your extrusion slot.
You may find a better orientation for printing, this just worked for me for getting a quick print with the least amount of support material to remove.
You will need to remove support material from inside the phillips head driver recess if you use supports.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Supports:
Yes
Resolution:
.2
Infill:
60%
Filament:
Hatchbox PLA
Black Post-Printing =============
This is the orientation I used to print these. The phillips head recess will have some support material you will need to remove to be able to use the drive recess. The 90 degree orientation clip will have support material under the body. Using 80mm/sec print speed and .2 layer height, I can print both of these in 10 minutes.
Category: 3D Printer Accessories