1 / 5
Dewalt 745 Table Saw Dust Port to Dust Right Adapter — zdjęcie 1
1 / 5

Dewalt 745 Table Saw Dust Port to Dust Right Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a compact adapter that allows the Rockler Dust Right 4'' Quick Change dust collection hose to fit the Dewalt…

Ocena
0 / 5
Polubienia
9
Pobrania
96
Wydruki
0
Wyświetlenia
967
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a compact adapter that allows the Rockler Dust Right 4'' Quick Change dust collection hose to fit the Dewalt DW745 table saw. This adapter has an extreme off-center hole design that allows to it clear the bottom frame of the saw. This should have a snug fit over the Dewalt Dust Port and then allows for the Dust Right hose end to easily push on and off as needed. When the Dust Right hose is not connected, the is pretty much flat to the back of the saw vs using the Dust Right 4" to 2.5" adapter that sticks out pretty far and has to be held in place with hose clamps.

If the fitting is too loose on the dust port, wrap the post with a couple of turns of electrical tape to make it tighter. It fits very tight on my saw without any tape.

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Rafts:

No

Supports:

No

Resolution:

.3

Infill:

20%

Filament: Amazon Basics PLA Black


Notes:

If it fits too loose on your saw port, then warp the post in a little tape. This was not needed on my saw.

Post-Printing =============

Category: Parts

Tagi