Full ATX PC Bench / PC Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This PC bench / case actually fits a full ATX motherboard and supports radiators from 240mm up to 360mm
- Ocena
- 5 / 5
- Polubienia
- 450
- Pobrania
- 1113
- Wydruki
- 3
- Wyświetlenia
- 28 253
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
When I printed the “ATX PC bench case” from Chyneuze, I found out it wasn't actually ATX but mATX and my motherboard didn't fit the thing because the screw holes didn't line up.
I then took his work and modified it, so it can fit an ATX motherboard. I also changed the tolerances a little bit as for me the printed parts had an inner diameter of around 14,5mm - 14,7mm instead of 15mm.
Furthermore I changed the radiator mount to comply with the wider motherboard and still be able to fit a 240mm radiator as well as a 360mm radiator.
For those using an air cooler and wanting full stability I added modified parts for an aluminium pipe. Just use a 340mm long 15x15mm aluminium profile to connect the Top_stabilizer_Left and Top_stabilizer_Right parts.
Theres also two simple caps for those, who don't want any extra stability, which I wouldn't recommend though.
Tl;dr:
print following files for 240mm radiator system:
- 01
- 02
- 03
- 04
- 05
- 06A
additional stuff needed:
- 2x 450mm 15x15mm aluminium extrusion
print following files for 360mm radiator system:
- 01
- 02
- 03
- 04
- 05
- 06B
additional stuff needed:
- 2x 450mm 15x15mm aluminium extrusion
print following files for air cooler max stability system:
- 01
- 02
- 03
- 04
- 05
- 08B
additional stuff needed:
- 2x 450mm 15x15mm aluminium extrusion
- 1x 340mm 15x15mm aluminium extrusion
print following files for minimum stability:
- 01
- 02
- 03
- 04
- 05
- 09C
additional stuff needed:
- 2x 450mm 15x15mm aluminium extrusion
Have fun!