Meanwell PSU Offset Bracket for Ender 3 Dual-Z
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount the power supply in the same general area, but away from the Z axis.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 252
- Wydruki
- 4
- Wyświetlenia
- 1364
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a simple bracket to offset the PSU off from the Z-axis upright, making way for a 2nd lead screw. It mounts to the 4040 extrusion using M4 screws and T-nuts.
Print it with the side which faces the PSU facing down on the bed. No supports should be required. It will fit on the Ender 3 print bed: just rotate it 45 degrees and turn off any skirt, brim, raft, etc - see screenshot.
Be sure to add a ground wire to somewhere appropriate on the frame - search this is if you are not sure. This isolates the PSU from the frame so the ground path needs to be recreated.