1 / 3
Filament Guide for 2020 Aluminum Extrusion
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a little clip-on filament guide for the Folgertech FT-5 but it will work for any printer with 2020 aluminum…
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 214
- Wydruki
- 3
- Wyświetlenia
- 738
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (0)Kolekcje (88)Powiązane
This is a little clip-on filament guide for the Folgertech FT-5 but it will work for any printer with 2020 aluminum extrusion rails. Simply snap it on and pass your filament through the guide! There are models with holes parallel and perpendicular to the extrusion. If your printer is not very precise, you may want to scale up this model 1%-2% to ensure it snaps on correctly, but make sure that it clips tightly enough to not slide.
Category: 3D Printer Parts