Skadis Shelf simple angular version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis Collection Shelf for everyone who finds the standard models too round. Plain and simple square.
- Ocena
- 4 / 5
- Polubienia
- 29
- Pobrania
- 177
- Wydruki
- 2
- Wyświetlenia
- 1030
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Skadis Collection Shelf for everyone who finds the standard models too round. Plain and simple square.
Questions and suggestions for improvement are welcome in the comments. If you like it then please leave a rating or a make. Thanks very much!
Variants
- Shelf 80 x 90 x 35 mm with 1 compartment
- Shelf 80 x 90 x 35 with 4 compartments
- Shelf 160 x 90 x 35 with 1 compartment
Inspired by the collection of CSD Salzburg! Uses the "Skadis Universal hook" from CSD Salzburg. Those are the best anyway.
Print instructions
My print is made in PLA 1.75mm, with 0.2mm layer height on a Creality Ender3V2 printer.I print it with support and brim. so that the model does not become deformed on the heating bed.
License
Skadis_Universal_Hook.stl comes from this design by CSD Salzburg on Thingiverse, and is provided under cc-nc license.