Whoop canopy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a strong and light Tiny Whoop style (25.5 x 25.5 mounting) canopy specifically deigned to accept: HDZero -…
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 381
- Wydruki
- 4
- Wyświetlenia
- 3279
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a strong and light Tiny Whoop style (25.5 x 25.5 mounting) canopy specifically deigned to accept:
- HDZero - Nano camera (also other 14mm nano style cameras)
- Happymodel - ELRS PP / EP2 receivers (the RX fits behind the camera on a tray - glue in place)
- VTX antenna (these are light weight & cheap - 4mm diameter single element type) - friction fit or glue
The canopy provides good protection and stability for the camera.
Four versions included:
NEW - TW (Tiny Whoop) Fastback version
NEW - TP (Tooth Pick) Fastback version
Old version - tiny whoop style - taller version with screws from the top down into a regular whoop frame
Old version - toothpick style - taller version that takes 2mm nylon nuts with the mounting bolts coming up through the frame from the bottom up
The new versions have improved characteristics - lighter (2 grams - printed in ABS), refined to improve strength with better protection for longer lenses.
Note - a newer lighter (1g) canopy for - HDZero - Nano lite - https://www.printables.com/model/401939-whoop-micro-canopy-hd-zero-nano-lite-camera
The micros in the pictures
Whoop
- Whoop - Trashcan 75mm frame
- Happymodel Crazybee F4 Pro V3
- Happymodel PP / EP2 RX
- Happymodel EX102 10000kv motors (2S =13000kv / 3S = 10000kv)
- HDZero whoop VTX
- HDZero nano camera
- Firmware Betaflight 4.3 / BlueJay 0.16 @ 96k
TKS Rocket
- TKS 1s Rocket freestyle frame 75mm 2mm carbon (fitted with 2S) - https://www.jacks3dprinting.com/collections/frames/products/tks-65mm
- Happymodel Crazybee F4 Pro V3
- Happymodel EP2 RX
- Happymodel EX102 10000kv motors (2S =13000kv / 3S = 10000kv)
- HDZero whoop VTX
- HDZero nano camera
- TKS 75mm frame
- Custom battery mount - https://www.thingiverse.com/thing:4831044
- Firmware Betaflight 4.3 / BlueJay 0.16 @ 96k
Presets for Betaflight:
- https://github.com/Bacon2002/firmware-presets
- Bacon2002-Presets-Live
The canopy was designed for a TKS / whoops / micros / toothpick frame.
TKS Rocket 2S 78mm frame but fitted with 3S to follow... https://www.jacks3dprinting.com/products/tks-2s-rocket-race-78mm-2-5mm-carbon-with-motor-screws
Also see the following for different version which can accommodate lollypop style antenna: https://www.thingiverse.com/thing:4830204 https://www.thingiverse.com/thing:4831044
Category: R/C Vehicles