Snap-on binocular to tripod adapter (for Tronic 10x25), no glue
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of great tripod adapter for binoculars that should fit tronic 10x25. Need 2x M3 nut and 2x M3 screws
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 574
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
The original was too big for my binoculars, so I edited the snap-on bracket in blender.
Then I noticed, that my tronic has round feature at the bottom, so I put a hole in the bottom part of the bracket so it fits.
Also, I'm not a huge fan of glueing prints together, so I went for M3 screws.
Print the “nut” part flat on the bed with max infill (also 0.1 or 0.12 layer height, so the thread details wont be lost), and the bracket on the side.
After printing, put the M3 nuts in the pockets and screw both pieces together.