1 / 1
Ethernet cable clip for mounting next to furniture — zdjęcie 1

Ethernet cable clip for mounting next to furniture

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cable clamps are usually supposed to be mounted on a sturdy wall with a simple nail or a small screw. But on some…

Ocena
0 / 5
Polubienia
8
Pobrania
28
Wydruki
0
Wyświetlenia
400
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

Cable clamps are usually supposed to be mounted on a sturdy wall with a simple nail or a small screw. But on some older buildings, the wall is often too porose and would need larger screws and a (chemical) dowel. To avoid this, also some furniture next to it can be used to support the cable clamp.

It is important that the furniture itself only has a small cap between itself and the wall.

To hide the nail, a small cover can be attached. It might be necessary to mirror it inside the slicer when the cable should not be mounted on the right side of the furniture.

Print Settings

Printer:

Qidi X-MAX

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.08mm

Infill:

100%

Filament:

Geeetech PLA

White


Notes:

Slicer should be changed to "inclusive" Slicing Tolerance

Category: Organization

Tagi