1 / 1
Ethernet cable clip for mounting next to furniture — image 1

Ethernet cable clip for mounting next to furniture

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cable clamps are usually supposed to be mounted on a sturdy wall with a simple nail or a small screw. But on some…

Rating
0 / 5
Likes
8
Downloads
28
Makes
0
Views
400
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution

Cable clamps are usually supposed to be mounted on a sturdy wall with a simple nail or a small screw. But on some older buildings, the wall is often too porose and would need larger screws and a (chemical) dowel. To avoid this, also some furniture next to it can be used to support the cable clamp.

It is important that the furniture itself only has a small cap between itself and the wall.

To hide the nail, a small cover can be attached. It might be necessary to mirror it inside the slicer when the cable should not be mounted on the right side of the furniture.

Print Settings

Printer:

Qidi X-MAX

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.08mm

Infill:

100%

Filament:

Geeetech PLA

White


Notes:

Slicer should be changed to "inclusive" Slicing Tolerance

Category: Organization

Tags