Platform/Belt holder for 2020 extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Platform to create add-ons for 2020 extrusions. Just screw in using M3 screw, anything that You want to add.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
I hate to re-print models when something breaks. Because of that, I have designed a belt holder/platform to create add-ons for 2020 extrusions. Just screw the add-on using M3 screw. The platform is secured to the extrusion using a M5x8 or M5x6 screw.
Design:
Designed with support-less in mind, after printing just cut off the bridging material. The model is meant to be printed with 0.2 mm layers. Securing it with a M5x6 will keep it in place if You use a M5x8 screw, it will also hold a belt that is inserted in the extrusion slot.
Add-on development:
There is standard hole spacing that can be used to develop new add-ons like end-stops, cable holders etc.
Options:
There is a model with M3x4 threaded inserts and one with smaller holes for self threading directly into the model.
Items needed:
- M5x6 mm (to keep it in place) or M5x8 mm (to hold belt),
- M5 screw nut for 2020 extrusion,
- *(Optional) M3x4 mm thread insert.
My add-ons: