Small to large switch adapter - e.g. Durst Comot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to fit a small switch from Aliexpress to a larger hole, I used this on a Durst Comot.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The adapter is made to fit a Durst Comot darkroom paper development machine, which is why the smaller cutout for the switch is slightly offset in the larger hole. You may adapt the innerOffset variable in the .scad file, if you need another orientation. The file needs BOSL2.
The small switch is a standard 8 x 15mm size. The switch itself is press-fit via the small hooks in the switch, while the Adapter is clipped in between two halves of the housing.
Print on a large flat side, with supports between the two halves. Or use the 3mf file. I printed in PLA, works perfectly fine.