Hypercube Evolution (Hevo) Mosquito BL Touch & Orbiter Hotend

New version here!: https://www.printables.com/model/279159-hypercube-evolution-phisto-hotend-assemblyThis

 is a modified Hypercube Evolution Hotend that accepts

a Mosquito Hotend (or a clone of the Mosquito),
a BL Touch bed levelling sensor,
an Orbiter Extruder (Ender 3 Version)
and dual 5015 Blowers for part cooling in a very compact form factor.
I use some heat melt inserts to fasten everything to the Hotend.
Print the parts with at least 4 walls and from ABS, so that they will stay strong and ridgid under heat. Supports are only needed for some areas directly over the printbed.
All the Solidworks files are included, so feel free to edit them!

Links to all the products I use in this:

Mosquito Clone (get the high flow version)
https://www.aliexpress.com/item/1005003528793908.html?spm=a2g0o.cart.0.0.ce6f3c00Lo6Omp&mp=1

BL Touch
https://www.aliexpress.com/item/32832887426.html?spm=a2g0o.9042311.0.0.27424c4dhYhIjJ

Orbiter extruder
https://www.aliexpress.com/item/1005001732280318.html?spm=a2g0o.9042311.0.0.27424c4dMPTfRa

Fans
https://www.aliexpress.com/item/32841967974.html?spm=a2g0o.9042311.0.0.27424c4dQ3vUQC

https://www.aliexpress.com/item/33049315281.html?spm=a2g0o.9042311.0.0.27424c4dQ3vUQC

I probably printed hundreads of hours with this without melting the BLtouch yet, even though it is very close to the hotend. I wrapped some heat reflective tape around it and I always keep my silicone sock on the hotend to make sure. I will not accept any responsibility if your components get damaged.