1 / 3
Clutch cover Suzuki GSF 600 Bandit — zdjęcie 1
1 / 3

Clutch cover Suzuki GSF 600 Bandit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement of the clutch cover for an aftermarket clutch lever.

Ocena
0 / 5
Polubienia
13
Pobrania
43
Wydruki
0
Wyświetlenia
1246
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Replacement of the clutch cover for an aftermarket clutch lever. After installing the aftermarket levers, the original clutch cover didn't fit anymore, so I designed this.

It is designed to work with M-style aluminum foldable levers, but it might work with similar levers from other brands. I also added a small “bandit” picture for fun :-)

I printed mine from Ninjaflex TPU and it fits just fine. The model has build-in supports (red areas in the picture). Simply trim them off after printing. The model does not require any additional supports as the maximum overhang is 45 degrees.

Enjoy.

Tagi