Liczymy pasujące modele…
IKEA hatte für kleines Geld Edelstahl-Stangen, die man unter die Oberschränke schrauben und tausend Sachen daran hängen kann. Kungsfors. Es gibt auch Erweiterungs-Haken dafür, aber im Lockdown ist's nicht so bequem heranzukommen. Hier…
Tachometer holder Suzuki Bandit GSF 650 S -> Naked
Adapter kit for mounting aftermarket LED indicators/blinkers on the GSF 600 1200 bandits. The rear adapter is in a similar design to the stock indicator. The front one is designed to fill the gap in the fairing. Printed int PETG
For the drone Eintagsfliege, most support are designed in place, be careful when removing the stem on the body from the cone support. A 1.1mm drill may be needed to clean the hole in the wing before plug in the stem. Higanbana Flower…
Hook for KUNGSFORS IKEA For Diameter 13mm
This is a adapter for the typical aftermarket 7 inch led headlights, just like this: https://www.ebay.com/itm/4052917702 I made mine specifically for the GSF 600 from 1999 but it should fit more motorcycles, like the XJ 600. I included…
I made this remix to add 2.5g switch to rack together with my old TPlink switch. the switch model i have: https://www.aliexpress.com/item/1005005943823096.html left side is printed from original model here:…
Print horizontally, in Orca Slicer you can use the "Auto Orient" feature and it will place it correctly. Use "Normal" supports, they should be generated for the thin part of the hook. Also raise the number of walls until no infill is…
Leitungsführung für Rock Shox Boxxer/Lyrik/Zeb für die neuen Modelle ab 2022 Sie unterscheidet sich leicht vom Original, da das zum drucken zu filigran gewesen wäre.
Disclaimer: This isn't an official product and neither it nor I am related in anyway to IKEA and/or any of their products or brands such as Kungsfors or Skadis. This hooks enable you to mount an Kungsfors magnetic strip on an Skadis…
Gedruckt in TPU Um so langsamer um so besser
Renting, so found a workaround for mounting the knife rack without drilling. Kudos to Spatula for the original design!
A double hook for two scissors (or anything else) for IKEA kitchen rail systems, or any rail with 16mm diameter. It sits stable on the rail, so does not lean, if you hang something on one side only. Print it with snug supports for over…
I was looking for a creative solution for a coat rack and decided to use Ikea Kungsfors kitchen racks. I just was not a fan of the steel hooks that are sold by ikea. So I made my own. There are three hooks A standard one that requires…
Needed a closed hook for the Ikea Kungsfors towel holder: https://www.ikea.com/de/de/p/kungsfors-stange-edelstahl-00442499/ Printed in PETG for outdoor use. On the photo the hooks are 3 years old and hold up really good. Used for a…
This is a remix project for Kitchenaid tools's hanger for IKEA KUNGSFORS. The print settings are preatty straight forward and you need supports under the curvature and the little knot on the underside part. You'll need a couple of M4 10mm…
Replacement of the clutch cover for an aftermarket clutch lever. After installing the aftermarket levers, the original clutch cover didn't fit anymore, so I designed this. It is designed to work with M-style aluminum foldable levers, but…
Edited the pedicel file to fit properly inside the stem
Designed for the Kungsfors wall rack https://www.ikea.com/us/en/p/kungsfors-wall-rack-stainless-steel-80334919/ Requires a small amount of flex. PLA+ and PETG are both suitable Feedback appreciated!
Item was printed using TPU. No special settings needed, just print with a low layer count (0.12) to help with overhangs. The item hasn't fallen out, even after 2000 miles on the road travelling faster than I care to admit. Passed its MOT…
I needed a new holder for installing the Ikea Kungsfors to the Ikea Bekväm (kitchen cart) which I actually use as workbench in my bike workshop. Happy printing!
This hook prints out quickly with less than 2 grams of standard PLA filament per hook. It mounts tightly to Kungsfors bars and can be used to hang light utensils - spiders, graters, etc. Doesn't require supports. Tested and works fine…
A simple hook design for the ikea KUNGSFORS stainless steel rods (d13mm). At my home I printed with PETG.
Went through my files and found my first CAD design for 3D printing: A stronger hook for IKEA KUNGSFORS or any other pipe system with a diameter of 12.8mm (or you could scale up/down accordingly). This hook stays in place when you hook…
Hole is 10mm, may need some adjustment to your needs
Holds the S hooks for IKEA “Kungsfors” wall rails vertical
Markierungsclip für die Kombination Clipfix und Ptfix auf Din-Schiene für P-Touch 9 mm
Divided into 2 pieces - no supports needed. Just glue together.
WORK IN PROGRESS, please read the description. I wanted mirrors on my GSF 1250 SA GT with turning signals. But didn't want aftermarkt models. So looked for a model that came with these from the factory. I found the Suzuki GSXR 1000…
I need a holder for my lighters so that have a home where I can find them, screw hole in the bottom for attaching to a shelf, block of wood or other surface. Fusion 360 CAD and step files included for remixing.
I needed something to raise the feet of my hi-fi system. Thanks to the scaling and the measuring tool in the slicer, the feet can be used universally for different heights and foot diameters. The model has a ridge to sit securely under…
this hook fits to ikea kungsors shelf
google Hub wall Mount for IKEA bar Kungsfors
the shelf fits to IKEA KUNGSFORS wall grid
A much sturdier version with holding arms on both sides. Attach with a M8 bolt to the frame piece holding the cockpit. The socket I used is this: http://www.louis.de/index.php?topic=artnr_gr&artnr_gr=10032936 Category: Automotive
Hier ist der Befestigungsflansch, um den Leuchtturm z.B. auf einer Platte anschrauben zu können.
Holder to Google mini for IKEA Kungsfors. You can wind excessive cable around the base. You need 2 M3 20mm or 25mm (little to long) and two M3 bolts. The holder is a remix Jonas Hanssons (Pawpawpaw85 on thingiverse) wall mount for a…
This is a sizing blank. Note: I don't have this board on hand, so the size is based purely from the documentation.
NOZZLE TEMP: 230 BED TEMP: 70 BED PLATE: PEI LAYER HEIGHT: 0.2 AMOUNT OF RAFT LAYERS: 3 MAX PRINT SPEED: 150 MM/S FIRST LAYER SPEED: 50 MM/S ACCELERATION: 2500 MM/S2 MATERIAL: PLA INFILL: 25% COOLING FIRST LAYER: OFF COOLING OTHER LAYERS:…
Hammerhalter French Cleat für Gedore Rückschlagsfreier Hammer und ähnliche Hämmer Kopfdurchmesser 40mm French Cleatleiste 15mm dick
Needed a rail for kungsfors LED, made something for it :) 8.6mm distance in the hole, so check if your LED strip will fit. Print 2, they should snap in place next to each for a full strip under the kungsfors rail shelf. Print on the flat…
Idea After installing a few IKEA Kungsfors racks on my kitchen wall, I noticed that the hooks on the bottom were sometimes a bit hard to manage when something was placed on top of the rack. Also, the top surface isn't smooth, especially…
Stand to use in your kitchen
Print 2 for the perfect tea box hanging on ikea kungsfors
the hook fits to kungsfors shelf
This is one of my first designs I ever made and does its job very well for already 1 ½ years. My main intention was to find a place to put my recipes while cooking. It needs to be easily readable and out of the way. You can actually put…
Should fit for the square Kungsfors type shelves from Ikea. Printed at 100% infill with PLA it is fairly strong and should be able to hold most of the accessories.
Sind Sie auf der Suche nach einem praktischen Werkzeug, das sowohl für den Mathematikunterricht als auch für kreative Projekte eingesetzt werden kann? Unsere Kreisschablone ist genau das Richtige für Sie! Diese vielseitige Schablone…
Suchen Sie ein praktisches Werkzeug, das den Mathematikunterricht erleichtert und gleichzeitig präzise technische Zeichnungen ermöglicht? Unsere Quader-Schablone ist genau das Richtige für Sie! Diese vielseitige Schablone ermöglicht es…
Hey! Check out the V2! It's Stronger! A new super duper strong desing to hold your favourite colors on your wall! This is a desing I made to use a KUNGSFORS that I had bougth long ago for my kitchen and now it keeps my spools ready and…
Die Hyposensibiliserungsfläschchen der Hersteller werden in risiegen Boxen geliefert. Da wird der Kühlschrankplatz schnell eng. Mit dieser Dose können Sie die Packungsdichte im Kühlschrank deutlich verkleinern. Passend für jeweils 3…
Built as a project in school for 25 visitors
Eine Abdeckung für meine Heizungbefestigung mit den maßen 16x41MM Category: Household
This is a coffee bean tube holder for glass tubes at 30mm diameter. It's modeled off the original wooden holder that came with the tubes, but adapted so it can hang on a Kungsfors railing system from Ikea. There are two versions posted.…
Why? This is an adapter for fitting one 100mm wall hole fan to a Glass brick ventilation wing. The wing can then stay open and the fan can ventilate outwards. The Glass brick ventilation wing shown in the pictures is probably quite old, I…
Hier kommen noch Werkstatt Tips, wie man Reibahlen handhabt, denn eine geriebene geometrisch exakte Bohrung macht den Rotorwechsel/Wartung erheblich leichter…
The Givi PL539 does not seem to quite fit the 2005 Bandit 650S. These models are what I have printed and used on my own motorcycle to get the luggage rack to mount. I have printed these models in nylon at 265C for better heat resistance…
Senseo Pad Holder for IKEA KUNGSFORS Hooks Printed with Prusa MK3S
Kupplungsfedern für Spur 2m und Spur G, zum Austausch der handsüblichen Teile. Kupplung liegt damit etwas straffer an. Die Federn können gewendet werden, falls nach längerer Zeit die Federkraft nachlässt. Ausdrucken auf HP Multijet in…
This hook has an embedded 8mm diameter, 3mm thick magnet embedded, so it firmly stays on the knife strip. Can be used to hang small, non-magnetic items like bottle openers, etc.
Simple clip to hang Ikea Kungsfors magnetic knife rack on top of the Tisken towel rack. https://www.ikea.com/us/en/p/kungsfors-magnetic-knife-rack-stainless-steel-40334921/…
If you are like me you don't immediately throw away oil and sauce bottles when they are empty because in truth they are not. You just can't get the very last out of that @#*& bottle. And if you are like me you don't just accept that fact…
A simple standoff for moving the rail a bit farther from the wall, making it more practical as a towel holder
Hey, wall hoes with lettering field were urgently needed in our company because otherwise we are looking for the keys. printed with a 0.4mm nozzle on 0.20 structural with organic supports Have fun Hey, Wandhacken mit Beschriftungsfeld war…
This is a tube for Self Watering Birds in Glass to reduce dirt getting into the Glass tube and reducing mess during refill. Info. The Self Watering Birds in GlassSold are primarily sold in Denmark Link:…
Schlichter Buchecken-Protektor zum Schutz von Buch- und Heftseiten. Wird einfach auf die Ecke geklebt und verhindert Knicke und Abnutzung. Ideal für Schule, Büro und unterwegs.
We have a ikea rail in our kitchen, so I adapted the "greatest towel hanger" by MaxT to fit there. The clearance is detailed, to allow it to slide onto the rail and fix with a turn. Sufficiently tight fit without to much load on the 3d…
Um eine Schicht im Modell richtig auszudrucken, muss man im Slicer die Einstellung „Externe Brücken Füllrichtung” (engl. „bridge_angle”) auf 45 Grad relativ zum Modell einstellen: "Relativer Brückenwinkel" (engl.…
Bought the double kungsfors bar but wanted to split it afterwards to i needed a new wall bracket Printed with PLA and 0.4mm nozzle without supports
This protective sleeve was designed to fit over the IKEA Kungsfors magnetic knife holder. The sleeve prevents knife edges from making direct contact with the metal surface, reducing the risk of chipping when placing or removing knives.…
Rolls of electrical and masking tape collected in the base of my Kungsfors rolling cart. This tape-roll holder gets the tape up off the shelf and makes it readily accessible. More information at…
Simple Ipad holder for the Ikea Kungsfors wall mount system. Tested with the 10.5 inch ipad. For bigger tablets you may need a longer mount or an additional hook to keep the tablet from falling over. Printed with PLA CF, should work with…
A cable clip for 60*60 cable duct (LFG 60). The original dimensions differ (it's 58mm width and not 60mm as advertised). So you may have to do a test print and see if it fits. It was printed in ASA but any other filament should work.…
IKEA Kungsfors round recipient divider, easy to print.
Extra support for IKEA - Kungfor Rails. I used strong double tape to attach my rails to the wall, but the small contact area of the screw pads, plus the wet environment of the kitchen and the weight caused them to detach every so often.…
Ersatzteil für Bosch CX 2nd Gen. gedruckt mit Flexfill 98 A. 100% infill. Sparepart for Bosch CX 2nd Gen. printed in Flexfill 98A. 100% infill.
IKEA Kungsfors hook wall spacer and protection.
Držáky pro magnetický držák nožů IKEA KUNGSFORS, ale jistě bude použitelný i pro jiné modely. Vytvořeno tak, aby se nemuselo vrtat do kachliček.
Rear plate adapter for Startech PEX10GSFP for fitting in M920q. M3x5.7mm heat inserts from CNC Kitchen fit in holes. https://www.startech.com/en-us/networking-io/pex10gsfp
This is a coffee bean tube holder for glass tubes at 30mm diameter. It's modeled off the original wooden holder that came with the tubes, but adapted so it can hang on a Kungsfors railing system from Ikea. There are two versions posted.…
Schlichter Buchecken-Protektor zum Schutz von Buch- und Heftseiten. Wird einfach auf die Ecke geklebt und verhindert Knicke und Abnutzung. Ideal für Schule, Büro und unterwegs.
This protective sleeve was designed to fit over the IKEA Kungsfors magnetic knife holder. The sleeve prevents knife edges from making direct contact with the metal surface, reducing the risk of chipping when placing or removing knives.…
Designed for the Kungsfors wall rack https://www.ikea.com/us/en/p/kungsfors-wall-rack-stainless-steel-80334919/ Requires a small amount of flex. PLA+ and PETG are both suitable Feedback appreciated!
Die Verlegung der Leitungen von der PSU und dem rechten Motor der Z-Achse war mir schon zu Beginn ein Dorn im Auge. Nun konnte ich mit dem Aufbau des zweiten Druckers eine Entwichlung mir überlegen, die ich gerne mit euch teilen möchte.…
