Marble track - Stabiliser system for elevation system and motorized lift
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 6th of March the w.i.p. status has been removed from the stabilization system use two sticks and one clip…
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 216
- Wydruki
- 0
- Wyświetlenia
- 2104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 6th of March
- the w.i.p. status has been removed from the stabilization system
- use two sticks and one clip (tight) to create a stabilization beam.
- The ML4 stabilizer ring is only applicable for the Motorized Lift v4
- The ML4 stabilizer clip can be used on either v3 or v4 of the Motorized Lift.
- Stabilizer system - base can be used for all parts (elevation system, motorized lifts)
Since some people have issues with the motorized lift when it's getting too high I've come up with this stabilizer system. It's universal for all my parts and works fine with the elevation system parts.
The idea behind it is that you can stabilize two 'towers' structures to prevent too much wobble between the 'towers' causing the rails to fall out. This might happen when the balls go fast from one top to the other.
The other benefit using this system is that the motorized lift doesn't have issues anymore with spreading followers causing the balls to fall out. And you can use it with the standard motorized lift components.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
50%
Filament: REAL PLA Black
Category: Playsets