1 / 5
Soap dish — zdjęcie 1
1 / 5

Soap dish

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

2,02 € – 2,47 € netto (bez VAT)

Dla pliku: soapdish_V9_smallDish_0.2mm_PLA_MK3_2h44m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 2,25 € netto (środek widełek).

Masa podana przez autora
18 g
Czas druku podany przez autora
2,73 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Minimal, wiggly soap dish. Different sizes and aspect ratios available.

Ocena
4,857 / 5
Polubienia
60
Pobrania
388
Wydruki
11
Wyświetlenia
1848
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Mathematically designed soap dish! Fully configurable and available in several sizes

  • the tops are lower in the middle, so the soap doesnt slide off 
  • the bottom trenches are higher in the middle, so water flows off to both sides

Printing

Print vertically. There will be a small line to connect the individual wiggles to ensure the print sticks to the print bed. Remove the line after printing.

Use the “noPrintSupport” versions to print without that line in case your adhesion is good.

 

Thanks

The OpenSCAD “plot function” used to mathematically define this soap dish was created by Ryan A. Colyer. Thanks Ryan! It is public domain (CC0).

Tagi