Acme threaded hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screws on an Acme 3/4" threaded pole end.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 235
- Wydruki
- 0
- Wyświetlenia
- 1117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
New to Fusion 360 but this is a Acme ¾" 5 TPI threaded hook that I made to screw onto an Acme-threaded pole (used for brooms, painter poles…).
This use case was for someone in a wheelchair that couldn't lift their foot rest up on their own when getting in/out of their wheelchair. It screwed onto a 2-4 foot telescoping painters extension pole and they could either use the hook to hook onto a metal loop or hook onto the footrest itself.
I printed in PLA. In the one pictured, I added some fuzzy skin on the inside to make it a bit less slippery as a test.
Maybe someone else, like a one-armed pirate, can use this.
Banana for scale only