Bogg Bag Pineapple Charm Decoration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple pineapple charm to personalize your Bogg bag. Attaches securely by screwing on through one of the bag's holes.
- Ocena
- 4,667 / 5
- Polubienia
- 67
- Pobrania
- 518
- Wydruki
- 2
- Wyświetlenia
- 1828
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this simple pineapple charm to add some personality to your Bogg bag. After having lost several of these charm-type decorations on both Bogg bags as well as on Crocs, I designed this charm to stay securely attached via a threaded screw/bolt mechanism that passes through the bag's holes. The bolt itself has a large (US Quarter-sized) head to prevent the charm from pulling out of the hole once attached.
Printed without supports, threaded bits pointing up. I was able to print this very quickly and successfully using a 0.28mm layer height and printing at 70mm/s on my Ender 3 v2. I used Arctic Teal PolyTerra PLA for the print shown in the photos. I used 100% infill on the bolt part for added strength, but the main charm should only need 20-30% infill.