Bogg Bag Pineapple Charm Decoration
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple pineapple charm to personalize your Bogg bag. Attaches securely by screwing on through one of the bag's holes.
- Rating
- 4.667 / 5
- Likes
- 67
- Downloads
- 518
- Makes
- 2
- Views
- 1,828
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this simple pineapple charm to add some personality to your Bogg bag. After having lost several of these charm-type decorations on both Bogg bags as well as on Crocs, I designed this charm to stay securely attached via a threaded screw/bolt mechanism that passes through the bag's holes. The bolt itself has a large (US Quarter-sized) head to prevent the charm from pulling out of the hole once attached.
Printed without supports, threaded bits pointing up. I was able to print this very quickly and successfully using a 0.28mm layer height and printing at 70mm/s on my Ender 3 v2. I used Arctic Teal PolyTerra PLA for the print shown in the photos. I used 100% infill on the bolt part for added strength, but the main charm should only need 20-30% infill.