1 / 2
IKEA Skadis - Clip for (Lidl) Powerfix Magnetic Tool Holder Strip — zdjęcie 1
1 / 2

IKEA Skadis - Clip for (Lidl) Powerfix Magnetic Tool Holder Strip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An IKEA Skadis compatible clip for the Powerfix magnetic tool holder bar sold in Lidl

Ocena
5 / 5
Polubienia
38
Pobrania
141
Wydruki
2
Wyświetlenia
1496
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

An IKEA Skadis compatible clip for the Powerfix magnetic tool holder bar sold in Lidl. These clips are designed to hold the bar in place regardless of whether force is applied to the bar upwards or downwards, hence the upwards facing part of the clip not usually seen on Skadis hooks.

This means you will either need access to the back of your board or you will have to break the clips themselves if you want to remove the bar!

I printed one and mirrored it to print the other side for aesthetics, this is not necessary.

To attach it to the board, the hook with the sharp corner is on top and should be slid in, applying downwards pressure until the clip snaps into place.

Printing:

  • Any rigid filament material such as PLA, PETG, ASA
  • Recommend 3 perimeters and 30% infill

Tagi