1 / 2
WIP : PET bottle strip cutter for recycle them to 3Dprinter filament — zdjęcie 1
1 / 2

WIP : PET bottle strip cutter for recycle them to 3Dprinter filament

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tool to get strip out of PET bottle to recycle them into 3D filament (Recreator3D)

Ocena
4,75 / 5
Polubienia
76
Pobrania
627
Wydruki
8
Wyświetlenia
4057
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This design is made to cut PET bottle to recycle them into 3Dprinter filament.

created for the recreator from Josh (https://www.facebook.com/groups/recreator3d/)

The cartridge is made to easily change the strip height (from 1 mm to 13mm)

Just add a coin in the cartridge to slowdown the friction of the PET to the printed part.

****

The cut system is well explened on internet this design use 2 ‘608ZZ’ ballbearing (the same from the handspinner !)

****

M8 rod + nuts + washer (DIN 934)

608zz ball bearing

1 big rod + nut for the bottle upright (25 cm minimum)

2 small rod +nuts for the ball bearing axes.

****

if you want to modify it : https://www.tinkercad.com/things/dmSUcBHhFU7

Tagi