1 / 6
Miniature Legion 5 Gaming Laptop (1/4 scale)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a miniature gaming laptop (non-functional).
- Ocena
- 0 / 5
- Polubienia
- 52
- Pobrania
- 203
- Wydruki
- 0
- Wyświetlenia
- 922
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (54)Powiązane
Print with 0.1mm layer height to get a cleaner look.
Tolerances around the hinge are tight so you may need a hobby knife or some sandpaper to trim down the hinge components to fit.
Supports are not required and I have included 4 stickers that can be glued onto the lid with some glue stick to act as the display.
I recommend printing this in a black plastic. (I only had white pla)
STEP files are also included if you wish to modify it.
Materials I used:
- Superglue
- Gluestick
- Small paperclip (~.75mm)
- 2d printer (optional)
- Hobby Knife
- Fine Sandpaper
Assembly instructions:
- Glue “Bottom Panel.stl” to the bottom of “Body.stl” (refer to images for detail)
- Glue “Hinge.stl” into the holes above the keyboard
- Glue “Feet.stl” into the holes in the bottom of “Body.stl”
- Position “Lid.stl” over the hinges
- Insert paperclips and trim off excess with flush shears (wear eye protection)
- Put a drop of superglue over the exposed end of the paperclip to hold it in place (optional)
- Glue on screen stickers (with glue stick)