1 / 6
Miniature Legion 5 Gaming Laptop (1/4 scale) — image 1
1 / 6

Miniature Legion 5 Gaming Laptop (1/4 scale)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

It's a miniature gaming laptop (non-functional).

Rating
0 / 5
Likes
52
Downloads
204
Makes
0
Views
930
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Print with 0.1mm layer height to get a cleaner look.

Tolerances around the hinge are tight so you may need a hobby knife or some sandpaper to trim down the hinge components to fit. 

Supports are not required and I have included 4 stickers that can be glued onto the lid with some glue stick to act as the display. 

I recommend printing this in a black plastic. (I only had white pla)

STEP files are also included if you wish to modify it.

Materials I used:

  • Superglue
  • Gluestick
  • Small paperclip (~.75mm)
  • 2d printer (optional)
  • Hobby Knife
  • Fine Sandpaper

Assembly instructions:

  • Glue “Bottom Panel.stl” to the bottom of “Body.stl” (refer to images for detail)
  • Glue “Hinge.stl” into the holes above the keyboard
  • Glue “Feet.stl” into the holes in the bottom of “Body.stl”
  • Position “Lid.stl” over the hinges
  • Insert paperclips and trim off excess with flush shears (wear eye protection)
  • Put a drop of superglue over the exposed end of the paperclip to hold it in place (optional)
  • Glue on screen stickers (with glue stick)

Tags