1 / 2
Magnet depth reducer/spacer 4 mm to 3 mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple depth spacer to reduce the depth of a magnet hole from 4 mm to 3 mm.
- Ocena
- 4,8 / 5
- Polubienia
- 4
- Pobrania
- 47
- Wydruki
- 6
- Wyświetlenia
- 312
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Most of my designs uses magnets with dimensions of 8 x 4 mm. If you have 8 x 3 mm magnets you can use this simple spacer to reduce the depth of the hole.
Use an 1.5/2mm mm allen key to align the spacer with the allen key hole in the piece you have printed, put a bit of superglue on the spacer and place it into the hole. Done.
