1 / 2
Magnet depth reducer/spacer 4 mm to 3 mm — image 1
1 / 2

Magnet depth reducer/spacer 4 mm to 3 mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple depth spacer to reduce the depth of a magnet hole from 4 mm to 3 mm.

Rating
4.8 / 5
Likes
4
Downloads
47
Makes
6
Views
312
Reviews
5

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Most of my designs uses magnets with dimensions of 8 x 4 mm. If you have 8 x 3 mm magnets you can use this simple spacer to reduce the depth of the hole.

Use an 1.5/2mm mm allen key to align the spacer with the allen key hole in the piece you have printed, put a bit of superglue on the spacer and place it into the hole. Done. 

 

Tags