MK3/MK3S+ LCD screen cover with ETR/ETC window (v1.1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LCD screen cover for the MK3/MK3S/MK3S+, but with a window for the ETR/ETC and a small magnet to keep it easily at hand.
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 71
- Wydruki
- 2
- Wyświetlenia
- 342
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple LCD cover inspired by others available, but with a small window to view the estimated time remaining (ETR) or ETC (est. time until filament change). I'm typically looking down on my printer, so there's a slight angled cutout so I can see the ETR/ETC without the cover thickness blocking my view.
Version 1.1 now has room for a small magnet behind the knob - I use a 6x2mm magnet (that is actually only 1.7mm thick) - so that you can easily place the cover on anything metal nearby so you don't lose track of it. I've placed several strips of this metal tape inside (and outside) of my enclosure.
Sure, the other info is good to know, but my temps are usually pretty steady and while printing, the only thing I really want to know is when its going to be done. :)
Printed in PLA, .2mm layer height, 20% infill.