Parametric Filament Spool Desiccant Container 40mm x 40mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desiccant container designed to be placed within filament spool storage bags
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 261
- Wydruki
- 4
- Wyświetlenia
- 1399
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a re-design of a great model by @animatorgeek. I needed additional sizes, and built it from scratch to be parametric. I will post common sizes that match spools I have, but you can create any size you'd like from the Fusion 360 design file. Model must be printed in Vase Mode.
Creating new sizes is easy:
Open the “Change Parameters” dialog and change the diameter and height to the desired values.
Adjust the base and lid thread size to match the new diameter. Make sure the size and designation matches on the base and the lid.
When printing, use the included 3mf project as a guide. To print quickly, increase the layer height and add a layer range to start 8mm below the top of the base model and lower layer height to 0.15mm for the threads.