G Clamp Cup Washer Shoe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bought a Neewer NW-8000 and the rebanded K-Mart Anko Professional Gaming Microphone. Due to the low friction of the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 312
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Bought aNeewer NW-8000 and the rebandedK-Mart Anko Professional Gaming Microphone.
Due to the low friction of the cup washer against the under-side of a desk, you would need to over-compensate with extra clamping force
This shoe was designed to slip over the cup washer to increase the friction to the clamped surface
Cup washer is 32mm diameter and model has a zero tolerance friction fit
It's best to use a flat-head screw driver to seat the shoe over the cup washer
Those with printers not dialled in may want to scale the model by a few percent larger
Neewer Boom Microphone https://www.amazon.com/dp/B081RLSPWB
Anko Branded K-Mart Australia Boom Microphone https://www.kmart.com.au/product/professional-gaming-microphone/3432806
Great review of the Boom Microphone
Have uploaded 3MF file which is compatible with Prusaslicer amongst others
3MF to STL conversion via Windows 10 3D Builder
Clamp known as
C-Clamp
G-Clamp
G-Cramp
Print Settings
Printer Brand:
Monoprice
Printer:
Mini Delta
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30%
Filament: Unknown TPU Black
Notes:
Printed concentric ring-side down
Cup Washer for boom microphone clamp
Print in this orientation. No supports required
Do not print in this orientation
Standard cup washer with crushed foam insert
Original
Note the poor contact surface leading to poor friction of the clamped surface
Post installation
Post installation reverse side
Category: Audio