1 / 3
Dummy/Vanity Wheels for NoPrep Drag cars or Shot Course Trucks — zdjęcie 1
1 / 3

Dummy/Vanity Wheels for NoPrep Drag cars or Shot Course Trucks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dummy wheels for keeping on the car for display or storage rather then have your race rubber tyres out in open air.

Ocena
0 / 5
Polubienia
7
Pobrania
98
Wydruki
0
Wyświetlenia
783
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These are just some dummy/vanity wheels you can put on your drag chassis to make it look/sit semi realistically on the shelf while not being used, rather then have your race rubber tyres or sticky, smelly old rubber tyres sitting on the shelf while not racing.

These are the same diameter as the Proline Reaction HP S3 Drag Slick tyres, not sure what the diameter of the orther tyres are as I don't have any yet.

They need to be printed with supports for best results and depending on how tuned your machine is they are relatively easy to remove.

Tagi