1 / 3
Travel Wish List Fridge Magnet Print in Place — zdjęcie 1
1 / 3

Travel Wish List Fridge Magnet Print in Place

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a way to show your friends and family the next places you want to visit on the fridge

Ocena
0 / 5
Polubienia
7
Pobrania
21
Wydruki
0
Wyświetlenia
196
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

The plan with this design is to stick pictures of your travel wish list on the fridge as a fun conversation piece for your travel plans, and another way to work in your 3D Printer into every conversation.

I wanted to design a Print in Place model for this design that is loosely modelled off the Octopus designs that you see floating around the internet.I figured it would also be cool to make it a fridge magnet too

The Model fits 2 different sizes of magnets if you want, but really you can get away with the smaller of the 2 since they fit into each leg and allow you to pose the model on a metal surface.

The magnets I used were

6mm diameter x 3mm high for the leg magnets

12mm diameter x 2mm high for the central magnet.

Purchased from amazon.ca

https://www.amazon.ca/dp/B07WCN5FGD/ref=cm_sw_em_r_mt_dp_TF0S2ZFMG0P5DV7BF5M9?_encoding=UTF8&psc=1

and

https://www.amazon.ca/dp/B07GX7Z4DF/ref=cm_sw_em_r_mt_dp_ZT22HT5TT46R086EKF5Q?_encoding=UTF8&psc=1

 

Print in place, Pop off Bed

 

I added the various pieces and spikes in order to prevent needed a raft or Brim. It should be able to be printed right onto the bed. I have had plenty of success and I wish you all the best (every printer is a bit different but I was getting repeatable results with this design and my printer.

 


 

Tagi