Travel Wish List Fridge Magnet Print in Place
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a way to show your friends and family the next places you want to visit on the fridge
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 21
- Makes
- 0
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
The plan with this design is to stick pictures of your travel wish list on the fridge as a fun conversation piece for your travel plans, and another way to work in your 3D Printer into every conversation.
I wanted to design a Print in Place model for this design that is loosely modelled off the Octopus designs that you see floating around the internet.I figured it would also be cool to make it a fridge magnet too
The Model fits 2 different sizes of magnets if you want, but really you can get away with the smaller of the 2 since they fit into each leg and allow you to pose the model on a metal surface.
The magnets I used were
6mm diameter x 3mm high for the leg magnets
12mm diameter x 2mm high for the central magnet.
Purchased from amazon.ca
https://www.amazon.ca/dp/B07WCN5FGD/ref=cm_sw_em_r_mt_dp_TF0S2ZFMG0P5DV7BF5M9?_encoding=UTF8&psc=1
and
https://www.amazon.ca/dp/B07GX7Z4DF/ref=cm_sw_em_r_mt_dp_ZT22HT5TT46R086EKF5Q?_encoding=UTF8&psc=1
Print in place, Pop off Bed
I added the various pieces and spikes in order to prevent needed a raft or Brim. It should be able to be printed right onto the bed. I have had plenty of success and I wish you all the best (every printer is a bit different but I was getting repeatable results with this design and my printer.