Dual WaveShare 4.2“ desktop e-Paper case - symmetrical and without holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual WaveShare 4.2“ desktop e-Paper case - symmetrical and without holes
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 1080
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Dual WaveShare 4.2“ desktop e-Paper case - symmetrical and without holes
Dual display version of my “WaveShare 4.2“ e-Paper case - symmetrical and without holes” display case as desktop variant.
It can hold up to 2 ESP32 controllers and up to 2 LiPo batteries with 10000mAh and of course 2 WaveShare 4.2” e-Paper displays.
The inside is almost empty space so you will have lots of free space to keep the ESPs, displays and batteries.
The outside is kept small with a footprint of: 120x100x45mm (WxHxD).
Note: If you already printed 1 display holder from this version “WaveShare 4.2“ e-Paper case - symmetrical and without holes”, you can reuse it for this variant and have to just print another display holder and the dual lid of course.
Printing instructions:
- I used the 0.2 speed profile and just turned the skirt off and 215°C for the nozzle
- For the 2 display holders an additional 5mm brim was set
- The 4 rings werde printed without a brim and with 100% infill
- The dial lid was printed without a brim
- The dual lid part needs supports from the print bed as the only part
Happy printing :)