1 / 3
Kratky Cover - A hydroponic mod for Lechuza plant pods — zdjęcie 1
1 / 3

Kratky Cover - A hydroponic mod for Lechuza plant pods

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A cover to use hydroponic plant pods and the Kratky method on Lechuza plant pots

Ocena
0 / 5
Polubienia
59
Pobrania
102
Wydruki
0
Wyświetlenia
3000
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A few months ago I saw the #Kratky planting method. Since I wanted to grow the basil for my Neapolitan pizzas myself, I had to try it out right away and started with some tinfoil-wrapped mason jars. That worked well, but was imho too messy on the windowsill and offered a bad used-space to usable-space ratio. 

That's why I took some plant pots I already had and designed a hydroponic cover that can hold up to 8 aerogarden-like plant pods. I can now repot and rotate cuttings individually.

You can use the original water level indicator with the new cover and there's a hole to easily refill water and a cap for it, to minimize the evaporation.

At the beginning you can use pods that hold some stone wool to let the seeds germinize. When the plants have grown, you can always cut them off above a branch and let them re-root in one of the pods. This creates a cycle and you always get fresh plants.

Pods to germinize: https://www.thingiverse.com/thing:32613 
Pods for cuttings: https://www.thingiverse.com/thing:4777717
Plant pot: LECHUZA 15467 DELTA 10

Printed upside down as provided in the STL files, no supports needed. I printed mine with a 0.8mm nozzle and .32 layer height to save some time. I also uploaded a version split in half (left and right) to use on smaller printers.

Changes:

v2 - 2025-09-03 - removed the water level indicator as I never used it, switched to round covers (they do not fall in)

Tagi