Easy Display side mount for Prusa MK3/s (right or left)

Easy mountable Display side mount ;) (right or left)

I designed this mount, cause my Printer stands sideways, and i also want a easy to assembly mount (after mounting is no new calibration needed).

u need to Print:

• 2x framebracket
• support one and two

u also need:

• 2x squared Nut (u get 4x by unmounting the standart supports, or from spare parts)
• 2x Bolt (u also get 4x by unmounting the standart supports, or from spare parts)

1. For assembly, u put the Square nuts inside of the just printed framebrackets, make shure these dont fall out easy. (maybe fix them with just a little bit of glue)
2. put a long screw inside the other side and and screw it just 2-3 times.

3. Now u are able to easy put the framebracket inside the frame of the Printer. If inside, u have to turn it 90°. (maybe a bit tricky and tools needed). If inside and turned, just pull a bit at the screw , u holding with, to fix the nut a bit.

4. Change the Original mounts at the Display with the fresh printed ones.

5. Put the screws inside the holes at the mounts, and carfully try to screw them intro the brackets. (each one just a little bit for beginning, than more, and after positioning the last bit) (maybe a bit tricky, but possible)

"et voilà" its done.

(befor first print, test that printbed had enought space, if not, u doing something wrong)

I would be very happy about some feedback. Are u happy? what could be better?

Have fun with it. ;)

PS: for no Brand Display Cover, watch my other designs.

Print instructions

The brackets will be better with supports.