Ender 3 4.3 inch touchscreen mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a 4.3-inch CSI Touchscreen mount for all ender 3 series printer
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 930
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
Hi, this is my first model upload so if anything is missing post a comment,recommended need and if possible I will get that resolved
Things required to assemble
The Screen itself I use this
4 M3x6 Screws
4 M2.5x4 Screws (you can also use M2.5x6 screws)
2 M5 Scews (can be any length if you already have the screw that is used to mount the ender electronic box or screen you can use that)
both parts of the model needs to be printed
the backing can use any infill I use 10% on mine
the frame should be printed at 100% infill lower is usable but not recommended
Assembly Instructions
- Print Both Parts
- connect the DSI display cable
- attach the screen onto the backing plate using M2.5 screws
- attach the backing plate with the screen onto the frame using M3 Screw
- If you're using an ender 3 v2 or S1 you will need to tap the screw hole
- attach the Display assembly to the printer using M5 screws
- setup the display like you would
- Done!