1 / 2
Swivel Filament Guide
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extrusion mounted fully adjustable filament pulley
- Ocena
- 5 / 5
- Polubienia
- 69
- Pobrania
- 302
- Wydruki
- 2
- Wyświetlenia
- 1937
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (80)Powiązane
Swivel Filament Guide
Fully adjustable filament guide that mounts to extrusions with T-nuts.
Swivel mount rotates 360° for accurate positioning. It uses a 608 bearing in the pulley.
This was inspired by a pulley on thingiverse.
https://www.thingiverse.com/thing:3129612
Hardware required:
1 - 608 Bearing
1 - 3m x 12mm cap head screw
4 - 4m x 12mm cap head screws
2 - 4m nuts
2 - 4m T-nuts
For heavy use applications, I suggest gluing the bearing and pulley halves together.
If you like, like.
Enjoy!