Creality X Carriage Hemera Slim Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
E3D Hemera slim mount for Creality systems with the CR10/S, Ender3/Pro X-carriage mount.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Summary
I made a slim mount for Creality machines (CR10/S, Ender/Pro tested) that use their standard X-carriage (newer printers may use a different carriage so I've included a drawing of the mount so you can verify fit before printing. I also made a the mount drastically slimmer at the eccentric nut, so you can access it more easily (my main gripe with the previous mount I was using).
The mount is 4mm thick on the z plane by design, but it will gracefully scale up in the slicer if you want a thicker mount.
Bill of Materials
2x M3x5x4 threaded heat-set inserts
5x M3x6mm socket head cap bolts
Printing Instructions
Print all parts as oriented in the STL. The EZABL Pro probe mount could also benefit from a brim.
Remixing for Other Probe Mounts
The center to enter offset for the probe mount is 16mm.
