Creality X Carriage Hemera Slim Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
E3D Hemera slim mount for Creality systems with the CR10/S, Ender3/Pro X-carriage mount.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- GNU General Public License v3.0
Summary
I made a slim mount for Creality machines (CR10/S, Ender/Pro tested) that use their standard X-carriage (newer printers may use a different carriage so I've included a drawing of the mount so you can verify fit before printing. I also made a the mount drastically slimmer at the eccentric nut, so you can access it more easily (my main gripe with the previous mount I was using).
The mount is 4mm thick on the z plane by design, but it will gracefully scale up in the slicer if you want a thicker mount.
Bill of Materials
2x M3x5x4 threaded heat-set inserts
5x M3x6mm socket head cap bolts
Printing Instructions
Print all parts as oriented in the STL. The EZABL Pro probe mount could also benefit from a brim.
Remixing for Other Probe Mounts
The center to enter offset for the probe mount is 16mm.
