1 / 6
Meanwell LRS-350 Mounting Feet and Ventilation Shelf — zdjęcie 1
1 / 6

Meanwell LRS-350 Mounting Feet and Ventilation Shelf

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The two files can be used separately or together. The first is a stackable lid or hat for the Meanwell LRS-350 power…

Ocena
0 / 5
Polubienia
10
Pobrania
97
Wydruki
0
Wyświetlenia
464
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

The two files can be used separately or together. The first is a stackable lid or hat for the Meanwell LRS-350 power supply, mine is the 5V version but I think they're all the same body. It gives you a few cm of clearance from the power supply so it can ventilate heat well enough, and gives you a shelf on top of it to mount something else on via Velcro or glue or zip ties.

The second file is a "foot" for it that you can use to screw the power supply into a board below it. The mounting holes for both items lines up with the four M4 holes on the power supply, so you can put a bolt through both parts into the power supply or just use either part separately. The feet are designed to be printed with the chamfered hole facing vertical, like you would put a screw straight down it and have it fit flush.

Category: Electronics

Tagi