Corner Stake Replacement for Volleyball Court Ground Webbing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model of a replacement ground stake for an outdoor volleyball boundary webbing such as "Park & Sun Sports Outdoor…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 470
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
A model of a replacement ground stake for an outdoor volleyball boundary webbing such as "Park & Sun Sports Outdoor Volleyball Boundary Webbing with Ground Stakes". One of the originals broke so I modelled it, making the back part larger for less painful pushing it into the ground/sand, and made it a little beefier in general. Should be stronger than the original stakes. You could probably print it smaller and it would work just fine, but the bungee might not fit in without modifications.
Print with supports everywhere, but change the overhang threshold to just 10° so that the rear side doesn't get supports added.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.20
Infill:
25%
Filament: eSun PLA White
Notes:
Print with supports everywhere, but change the overhang threshold to just 10° so that the rear side doesn't get supports added.
Category: Sport & Outdoors