1 / 5
Corner Stake Replacement for Volleyball Court Ground Webbing — image 1
1 / 5

Corner Stake Replacement for Volleyball Court Ground Webbing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A model of a replacement ground stake for an outdoor volleyball boundary webbing such as "Park & Sun Sports Outdoor…

Rating
5 / 5
Likes
8
Downloads
89
Makes
1
Views
469
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

A model of a replacement ground stake for an outdoor volleyball boundary webbing such as "Park & Sun Sports Outdoor Volleyball Boundary Webbing with Ground Stakes". One of the originals broke so I modelled it, making the back part larger for less painful pushing it into the ground/sand, and made it a little beefier in general. Should be stronger than the original stakes. You could probably print it smaller and it would work just fine, but the bungee might not fit in without modifications.

Print with supports everywhere, but change the overhang threshold to just 10° so that the rear side doesn't get supports added.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

Yes

Resolution:

0.20

Infill:

25%

Filament: eSun PLA White


Notes:

Print with supports everywhere, but change the overhang threshold to just 10° so that the rear side doesn't get supports added.

Category: Sport & Outdoors

Tags