1 / 2
Lens cap for Optoma GT1080HDR / DAEHHGNST — zdjęcie 1
1 / 2

Lens cap for Optoma GT1080HDR / DAEHHGNST

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A basic lens cap for the Optoma GT1080HDR (Regulatory No: DAEHHGNST) DLP Projector.

Ocena
0 / 5
Polubienia
2
Pobrania
123
Wydruki
0
Wyświetlenia
1084
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

This is basic lens cap for the Optoma GT1080HDR (Regulatory No: DAEHHGNST) DLP Projector.  The projector doesn't come with one and could really use one because the short-throw lens sticks out past the front of the projector.  It has a concave shape for your fingers to pull it off. There's also a couple little nubs on the inside which are designed to grab the grooves on the outside of the lens / focus assembly.  Print it with the flat side down, no supports required if your printer can handle a 50 degree overhang (most can).

I printed this on a Prusa Mini with Polymaker Tough PLA, Prusa Slicer defaults for Generic PLA (15% infill) with a 0.2mm layer height (QUALITY preset) and it worked fine.

The Fusion 360 model is also included.  

Tagi