Mk3 style heatbed cover Prusa Mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After finding out that Prusa ships the mini's with the connectors fastened at the bottom of the bed instead on the…
- Ocena
- 4,778 / 5
- Polubienia
- 47
- Pobrania
- 329
- Wydruki
- 8
- Wyświetlenia
- 2414
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
After finding out that Prusa ships the mini's with the connectors fastened at the bottom of the bed instead on the pads at the top. I wanted to change them to be fastened at the top.(don't like a burned house because of burning connectors)
But i really don't like the 'slide-in' cover they use for the mini. So i made a version that is inspired by the Mk3 heatbed cover.
The top part has more room so the connectors can be fastened at the top. Because it's a simple edit of the original step file, there shouldn't be a problem with the height.
Parts needed:
2x M3x10 socket head screw
2x M3 nut
2x m3 washers(for the nuts at the underside of the heatbed, so it doesn't damage the underside)
Use at own risk!
The 2 holes are closed for printing without support(it prints it as a bridge now, just punch trough the holes).
The original Prusa hole uses some fancy patern, but this is easier.