1 / 3
Vapor X adapter for Misfit Vapor Dock — zdjęcie 1
1 / 3

Vapor X adapter for Misfit Vapor Dock

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Vapor X adapter to fit the Misfit Vapor Dock

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
213
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

General

I printed myself this this Misfit Vapor Charging Stand thinking it would fit my Misfit Vapor X watch. I did not know the chargers for these devices were different. The Vapor X charger is a bit smaller. I didn't want to waste what I had printed so I decided to print something that just fits on top of the charging stand.

 

Take note: The STL file included does not include the original charging stand. Please visit the link above to download the charging stand THEN use this as an adapter. 

Printing

This is fairly easy to print, I used a 0.2mm nozzle at 0.2mm layer height with PLA. Print as is with no supports or anything.

Tagi