1 / 5
Electronic antenna broken cover replacing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought indoor electronic TV antenna. It was china made product with case from poor material.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I bought indoor electronic TV antenna. It was china made product with case from poor material. When the case was broken but antenna still working I decided to try replace it with 3D printed one. It was little bit complicated because all electronic parts were fitted on this case. I created 3D design in TinkerCAD.
Print instructions
It was printed from Prusa PLA, layer 0.2mm, fill 20%, without support. Thre are two parts of cover: top and back side.